iT-DiY.COM

When you replace the Hub/Bearing on a BMW, sometimes the inner bearing-race is left stuck on the axle… So, this video demonstrates the DIY steps on how to effectively remove a Sieged / Stuck inner bearing-race. Tools used: 3″ extension from a 1/2″ drive. Locking 3-Jaw Puller Note – You must have already Properly jacked [...]

How to change the oil on your 1995-2003 5-series or 1998-2005 3 series BMW. The BMW cars that have this engine are listed in this link: en.wikipedia.org Here are the parts you need: 1. A pan to drain the oil into 2. A wrench to undo the drain bolt which is an 18mm wrench or [...]

In title

How to remove Radiator Fan-Clutch Unit and Fan Shroud on a BMW 330i (E46) Tools used: 1. #1703 BMW Fan Clutch Tool 2. 32mm “Thin” wrench 3. Sloted/Flat screw driver 4. Padded Floor mats (to protect Fan blades in case you accidentally drop it, while unscrewing it.) NOTE: You may need to loosen/remove the Upper [...]

How to remove and replace a worn out idler pulley on a BMW 330i (E46) NOTE: You'll need to loosen/remove the main Serpentine Belt to be able to remove the idler pulley Safely! This is done by releasing the force of the Tensioner Pulley. WARNING : BE CAREFUL when working on the Tensioner Pulley. There [...]