Posts Tagged ‘case’
DIY My homemade Semi hollow body Guitar & Guitar Case
Saturday, August 7, 2010 16:44 27 CommentsSound demo: www.youtube.com Guitar features: -semi-hollow body -neck-through body -Tune-o-matic bridge -3-Way Switch -2x volume,2x tone(also switching between single or humbucker coil setup) -neck, fretboard, top – sycamore -body-ash -bottom of the body: ash-walnut tree-ash -oil finish -custom pickups: -neck – Merlin PAF AlNiCo2 (7,6KOhm) -bridge – Merlin Sabotage ceramic (15,2KOhm) Everything is made by [...]
Case-Mate DIY Case for the iPhone 3G & 3Gs
Thursday, July 15, 2010 19:04 No CommentsFOLLOW me on TWITTER for UPDATES and GIVEAWAYS: www.twitter.com CHECK this case out on the CASE-MATE web site: www.case-mate.com Special THANKS to Case-Mate for sending me this case for review.
First Look: Case-Mate DIY Case for iPhone 3G/3GS
Monday, July 5, 2010 11:20 No CommentsJust a first look at case mates DIY do it yourself case for iPhone 3G/3GS thanks to Dayna! www.case-mate.com Its a pretty cool case idea which will run you .99 but it had some flaws. The case didnt feet perfectly, it was messy inside, the picture looked good but not as good as I wanted [...]
DIY iPhone 4 Tripod Case/Plate
Sunday, July 4, 2010 8:36 25 CommentsJust went to my local Hardware store and checked out what they had for a 1/4″ screw to make this work! After a couple tries, I got it figured out… works like a charm! The case was 19.99 Bolts and parts needed for (round 2) were just under ! -Kyle Roberts ra-pictures.com TWITTER videokyle
Reveal Case for iPhone 4 from Griffin Technology (Review)
Friday, July 2, 2010 5:50 No CommentsThe Reveal for the iPhone 4 is from Griffin Technology. It is a light-weight case consisting essentially of a rubber frame and polycarbonate back shell. The case provides protection of the power and volume buttons, in addition to the back of the case. The case is similar to Apple’s Bumper case, but somewhat improved with [...]



























































