iT-DiY.COM

Grip Magnetic Mechanic Gloves *The ideal solution to keeping small parts and accessories from begin misplaced and within reach while working on roofs, carpentry, in my case automotive repair and assembling. *Super strong magnets keep small parts and accessories from getting misplaced or dropped. *Cut off design allows for maximum use of fingers; while the [...]

. E46 main Thermostat removal. NOTE: You will need to remove the Radiator Fan (if you have a automatic transmission) to reach the Thermostat. So, here’s the video: BMW Radiator Fan Removal www.youtube.com WARNING : BE CAREFUL when working near the Radiator Fan, DO NOT damage Fan Blades! DO NOT DROP the Fan once it [...]

When you replace the Hub/Bearing on a BMW, sometimes the inner bearing-race is left stuck on the axle… So, this video demonstrates the DIY steps on how to effectively remove a Sieged / Stuck inner bearing-race. Tools used: 3″ extension from a 1/2″ drive. Locking 3-Jaw Puller Note – You must have already Properly jacked [...]

E46 Fan Shroud removal (with Automatic Transmission) NOTE: You Must have already removed the Airbox “Snorkel” before hand… – You can view that DIY here: BMW Airbox Removal www.youtube.com ALSO: To Completely Remove the Fan Shroud, you will have to release the Radiator Fan from the Water Pump. That DIY is here: BMW Radiator Fan [...]

Well here’s the 1st Do It Yourself series for the 3 Series BMW E46! I Did this to help other people because i was in their shoes and turned to youtube and the internet when i need to get something done and youtube lack the videos to really help me in certain areas… STORY: This [...]